Model Number: H series
Gearing Arrangement: Helical
Output Torque: 2.6~900KN
Rated Power: 4~5000KW
Input Speed: 0~2200rpm
Output Speed: 0.7—1200RPM
colour: as required
Material: alloy steel and cast iron
Hardness of gear surface: HRC58-62
Mounting positon: horizontal / vertical
quality control system: ISO9001-2008
Transmission stage: 1 stage, 2 stage, 3 stage, 4 stage
Warranty: One Year
Packaging Details: wooden case
Port: HangZhou/ ZheJiang

H series helical gear box

♦ HB series gear units adopt currency layout and may transform into special reducer according to customer’s requirement.
♦. The housing of 1 size can realize parallel shaftmodes and horizontal mounting modes.Variety of components is reducible, the number of reducer’s mode is augmentable.
♦. Sound-absorbable structure, lager surface, big fan reduce temperature and noise, advanced grinding process of cylindrical gear and bevel gear improve stability and transmit power more efficeintly.
♦Input mode : motor connected flange ,shaft input.
♦ Output mode: solid shaft with flat key, hollow shaft with flat key, hollow shaft with shrink disk, hollow or solid shaft with involute splines , solid shaft with flange.
♦Mounting mode: Foot-mounted, flange-mounted, swing base-mounted, torque-arm-mounted.
♦HB series include sizes 3-26, Wholesale China Factory new product mini av sex toy vibrating roller massage stick number of stages is 1-4,ratio is 1.25-450. Combining with WR,S and K series, ratio will be higher.

Helical bevel Gearbox performance

1.Gear units are highly efficient and based on a modular design system which allows a reduced number of parts and housing.Interchangeability of components and compatibility within the product range.
2.The gradual speeds are propitious to the best dimension selection.
3.The noise evidently reduced by the grinding of bevel gears and designing by means of masak computer program.
4.Predominantly non-contacting wear-resistant labyrinth seals are possible.
5.Favorable thermal conduction by large fans incorporation a new type of air conduction fan with use of cowl.

Operation and Precautions:
Installation and use of gear box will be made according to the directions.Overload operation, to shorten the service life of the gearbox.Gear box in sliding, don’t hang upside, adjustable nut to adjust machine and adjust the firmness, return to normal use.Don’t push too hard and abnormal operation, causing damage of gearbox.

Care and Maintenance
1.Maintenance work must be carried out by trained professionals.
2.Disconnect the gearbox and all attachments
3.oil renewing.
4.Clean the vent valve.
5. Add grease to combined seal.
6.Clean up the fan and the surface of the gearbox.
7.Check the cooling coil.
8.The maintenance after the completion of “checking before starting the work”.

Bevel Gearbox,Helical Gearbox and Planetary Gearbox belongs to together and formed the industrial gearbox,Bevel Gearbox process design in transmission products belong to follow the pace of era of science and technology high-tech products,box using alloy steel carburizing and quenching.Perfect the overall design and high quality material makes the gearbox products follow the trend of The Times, leading the drive the development of industry.

Product usage:
Our gearbox are widely used in metallurgy, mining, lifting, transporation, construction, chemical, building, light industry, food, Advance 16A ratio 2 1 marine gearbox conveying machinery, marine, brick-making, ect…

Related ProductsOur main products:
WR, WF, WK, WS series modular gear speed reducer with brake motor;
H,B series standard industrial gearbox;
P series planetary gear speed reducer;
T series spiral bevel gearbox;
ZDY, ZLY, ZSY, ZFY parallel shaft series;
DBY, DCY, DFY vertical shaft series hardened gear reducer;
NGW planetary hardened gear speed reducer.

We could design and customized for our customers. Welcome to click me for more details information about our products.

Packaging & Shipping

Our Services
1,We are ready to provide you with technical advices and support.
2,Before product acceptance, we will answer all of your questions in a timely manner, Auto Rubber Parts Drive Shaft CV Joint Rubber Boot No. FB-2114 Outer Dust Boot OE No.44018-S84-C00 provide technical support.
3,Our technical services group will provide technical support for products repair and maintenance.
4,Our commitment is to create even more value for you, keep a close contaction relationship with our customers.

Company Information Since 1999, we are specialist manufacturer dedicated in gear transmission reducer.We could design and provide drive solution for you. We have a most experienced worker group in our company. We own the most advanced processing equipment and testing equipment. Our product has been exported to Europe, Southeast Asia, the Middle East, Africa, South America and many other countries and regions. They are widely used in paper mill, rubber processing, coal transportation industry, printing machine, steel mill, construction and other processing industry. Our products have the excellent quality of high stability , the advanced performance and competitive prices. We are continuous making a furthur growth with your cooperation.

Buyer Feedback We sincerely thanks for the trust and support from all our customers. In order to continuously improve the quality of our products and services, enhance the customer satisfaction, we would like to receive your feedback when you view our products online. Meanwhile, we eagerly look forward to get your valuable comments and suggestions on our work.
1,Do you have any questions about our products specifications?

2,Do you have problems about how to select the suitable gearbox for your machine or equipment?

3, Do you have any technical questions to get support or consult?

4,What’s your opinion about our products quality and services?

5,What’s your opinion about our products performance?

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.